-
Steel Nut Bolts
-
Steel Hex Bolt
-
Carbon Steel Bolt
-
High Tensile Stainless Steel Bolts
-
Carbon Steel Nuts
-
Stainless Steel Nut
-
Steel Flat Washer
-
Spring Steel Washers
-
Stainless Steel Washer
-
Fully Threaded Studs
-
Non Standard Fasteners
-
Seismic Wedge Anchors
-
Self Tapping Screw
-
Electrical Fasteners
-
Solar Panel Fasteners
-
Stainless Steel Shackle
-
BOSSARDThis is our European partner
-
LiIt's a good business
ANSI A320 L7 Carbon Steel Fully Threaded Studs

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMaterial | Carbon Steel Stainless Steel | SIZE | 1/4-4INCH |
---|---|---|---|
LENGTH | ALL KIND OF LENGTH | Surface | HDG YZP ZP BLACK PTEE DACROMET |
Samples | Free | ||
High Light | A320 Fully Threaded Studs,L7 Fully Threaded Studs,ANSI Carbon Steel Threaded Rod |
ANSI A320 L7 Carbon Steel Fully Threaded Studs
Originally approved in 1948, the ASTM A320 specification covers alloy steel and stainless steel bolting materials for low temperature service. This standard covers rolled, forged, or strain hardened bars, bolts, screws, studs, and stud bolts used for pressure vessels, valves, flanges, and fittings. Like the ASTM A193 specification, unless otherwise specified, the 8UN thread series is specified on fastener larger than 1” in diameter.
Below is a basic summary of a few of the common grades within the ASTM A320 specification. A number of other less common grades of ASTM A320 exist, but not covered in the description below.
|
|||||||||||||
|
|
|||||||||||||
|
A320 Grades
L7 Alloy steel | AISI 4140/4142 Quenched and tempered |
---|---|
L43 Alloy steel | AISI 4340 Quenched and tempered |
B8 Class 1 Stainless steel | AISI 304, carbide solution treated |
B8M Class 1 Stainless steel | AISI 316, carbide solution treated |
B8 Class 2 Stainless steel | AISI 304, carbide solution treated, strain hardened |
B8M Class 2 Stainless steel | AISI 316, carbide solution treated, strain hardened |
A320 Mechanical Properties
Grade | Diameter | Tensile, ksi, min | Yield, ksi, min | Charpy Impact 20-ft-lbf @ temp | Elong, %, min | RA, %, min |
---|---|---|---|---|---|---|
L7 | Up to 21⁄2 | 125 | 105 | -150° F | 16 | 50 |
L43 | Up to 4 | 125 | 105 | -150° F | 16 | 50 |
Class 1: BC, B8C, B8M, B8P, B8F, B8T, B8LN, B8MLN | All | 75 | 30 | N/A | 30 | 50 |
Class 1A: B8A, B8CA, B8MA, B8PA, B8FA, B8TA, B8LNA, B8MLNA | All | 75 | 30 | N/A | 30 | 50 |
Class 2: B8, B8C, B8P, B8F, B8T | Up to 3⁄4 | 125 | 100 | N/A | 12 | 35 |
7⁄8 - 1 | 115 | 80 | N/A | 15 | 35 | |
11⁄8 - 11⁄4 | 105 | 65 | N/A | 20 | 35 | |
13⁄8 - 11⁄2 | 100 | 50 | N/A | 28 | 45 | |
Class 2: B8M | Up to 3⁄4 | 110 | 95 | N/A | 15 | 45 |
7⁄8 - 1 | 100 | 80 | N/A | 20 | 45 | |
11⁄8 - 11⁄4 | 95 | 65 | N/A | 25 | 45 | |
13⁄8 - 11⁄2 | 90 | 50 | N/A | 30 | 45 |
A320 Chemical Properties
Element | L7 (AISI 4140) | L43 (AISI 4340) | B8 (AISI 304) | B8M (AISI 316) |
---|---|---|---|---|
Carbon | 0.38 - 0.48% | 0.38 - 0.43% | 0.08% max | 0.08% max |
Manganese | 0.75 - 1.00% | 0.75 - 1.00% | 2.00% max | 2.00% max |
Phosphorus, max | 0.035% | 0.035% | 0.045% | 0.045% |
Sulfur, max | 0.040% | 0.040% | 0.030% | 0.030% |
Silicon | 0.15 - 0.35% | 0.15 - 0.35% | 1.00% max | 1.00% max |
Chromium | 0.80 - 1.10% | 0.70 - 0.90% | 18.0 - 20.0% | 16.0 - 18.0% |
Nickel | 1.65 - 2.00% | 8.0 - 11.0% | 10.0 - 14.0% | |
Molybdenum | 0.15 - 0.25% | 0.20 - 0.30% | 2.00 - 3.00% |
A320 Recommended Hardware
Grade | Nuts | Washers |
---|---|---|
L7 | A194 Grade 4 or 7 | F436 |
L43 | A194 Grade 4 or 7 | F436 |
B8 Class 1 | A194 Grade 8 | SS304 |
B8M Class 1 | A194 Grade 8M | SS316 |
B8 Class 2 | A194 Grade 8 | SS304 |
B8M Class 2 | A194 Grade 8M | SS316 |
Strain hardened nuts available as a supplementary requirement |
Specification
A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread.
All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.
Materials and Chemical compstition
42CRMO
CHEMICAL COMPOSI % | ||||||||
C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
0.42 | 0.27 | 0.92 | 0.013 | 0.004 | 1.01 | 0.03 | 0.04 | 0.2 |
stainless steel
化学成分CHEMICAL COMPOSI(% ) | ||||||||||
Type | C碳 | Si硅 | Mn锰 | P磷 | S硫 | Ni镍 | Cr铬 | Mo钼 | Cu铜 | Others |
≤ | ≤ | ≤ | ≤ | ≤ | ≥ | ≥ | ≥ | ≈ | ||
201Cu | 0.08 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 14.0-17.0 | 2.0-3.0 | ||
201 | 0.15 | 1.00 | 8.50 | 0.06 | 0.03 | 3.50-5.50 | 16.0-18.0 | N≤0.25 | ||
130M/202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | N≤0.25 | ||
202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | |||
301 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 5.00-8.00 | 16.0-18.0 | |||
302 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | |||
XM7 (302HQ) |
0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.5 | 17.0-9.00 | 3.0-4.0 | ||
303 | 0.15 | 1.00 | 2.00 | 0.20 | ≥0.15 | 8.00-10.0 | 17.0-19.0 | ≤0.60 | ||
303Cu | 0.15 | 1.00 | 3.00 | 0.20 | ≥0.15 | 8.0-10.0 | 17.0-19.0 | ≤0.60 | 1.5-3.5 | |
304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 18.0-20.0 | |||
304H | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 18.0-20.0 | |||
304HC | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | 2.0-3.0 | ||
304HCM | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 17.0-19.0 | 2.5-4.0 | ||
304L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 9.0-13.0 | 18.0-20.0 | |||
304M | 0.06 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.0 | 18.0-20.0 | |||
305 | 0.12 | 1.00 | 2.00 | 0.045 | 0.03 | 10.5-13.0 | 17.0-19.0 | |||
305J1 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 11.0-13.5 | 16.5-19.0 | |||
309S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 22.0-14.0 | |||
310S | 0.08 | 1.50 | 2.00 | 0.045 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
314 | 0.25 | 15.-3.0 | 2.00 | 0.040 | 0.03 | 19.0--22.0 | 24.0-26.0 | |||
316 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
316Cu | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 2.0-3.0 | |
316L (12Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | ||
316L (10Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
321 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 9.00-13.0 | 17.0-19.0 | Ti≤5*C% | ||
410 | 0.15 | 1.00 | 0.03 | 11.5-13.5 | ||||||
416 | 0.15 | 1.25 | ≥0.15 | 12.0-14.0 | ||||||
420 | 0.26-0.4 | 1.00 | 0.03 | 12.0-14.0 | ||||||
410L | 0.30 | 1.00 | 1.00 | 0.040 | 0.03 | 11.5-13.5 | ||||
430 | 0.12 | 0.75 | 1.00 | 0.040 | 0.03 | 16.0-18.0 | ||||
430F | 0.12 | 1.00 | 1.25 | 0.060 | 0.15 | 16.0-18.0 | ||||
631(J1) | 0.09 | 1.00 | 1.00 | 0.040 | 0.03 | 6.50-8.50 | 16.0-18.0 | AL 0.75-1.5 | ||
2520 | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
410 | 0.015 | 1.00 | 1.00 | 0.04 | 0.03 | 11.5-13.5 |
Finish
PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON
PACKING
QBH BULK
20-25KG/CTN,36CTNS/PALLET
20-30KG/BAGS,36BAGS/PALLET
ONE TON/BOXES
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
EURO Pallet
THREE SPLINT PALLET
WOODEN BOX
The advantages of QBH
- QBH brand sales to the main quality assurance.
- Years of export trade management, excellent service, word-of-mouth guarantee.
- By working with TUV,escort for quality.
- Customization of non-standard parts can be made according to customer's requirements and drawings.
- For quality customers,we can provide a certain credit period.