Steel Nut Bolts
Steel Hex Bolt
Carbon Steel Bolt
High Tensile Stainless Steel Bolts
Carbon Steel Nuts
Stainless Steel Nut
Steel Flat Washer
Spring Steel Washers
Stainless Steel Washer
Fully Threaded Studs
Non Standard Fasteners
Seismic Wedge Anchors
Countersunk Head Screws
Solar Panel Fasteners
BOSSARDThis is our European partner
LiIt's a good business
Transmission Tower Zinc Coated A394T-0 A394T-1 Carbon Steel Bolt
|Material||Carbon Steel||Surface Treatment||Plain,Zinc/HDG|
|Grade||A394T-0 T-1 T-2||Process||Cold Forging|
|Sample||Free Sample||Packaging||25kg Carton+900kg/Pallet|
Zinc Coated Carbon Steel Bolt,
A394T-0 Carbon Steel Bolt,
A394T-1 Transmission Tower Bolts
Heavy hex head structural bolts from QBH company help you secure steel-to-steel structural connections. These rugged steel bolts come in galvanized, hot dipped galvanized, yellow zinc and plain finishes. Choose the thread size, thread length and overall length you need from a selection that numbers more than 1,000 pieces. When you need structural bolts, come to QBH company first and get the job done right.
ASTM A394 specification covers the chemical and mechanical requirements of hexagon and square-head zinc-coated steel bolts and atmospheric corrosion-resistant bolts for use in the construction of transmission towers, substations, and similar steel structures. The following types of bolts are: Type 0 includes hot-dip zinc-coated bolts made of low or medium carbon steel, Type 1 includes hot-dip zinc-coated bolts made of medium carbon steel, quenched and tempered, Type 2, and Type 3 includes bare, quenched, and tempered bolts made of weathering steel. Steel for the manufacture of bolts shall be made by any of the following processes: open-hearth, electric-furnace, or basic-oxygen. Type 1 bolts produced from medium carbon steel shall be quenched in a liquid medium from above the austenizing temperature. Type 1 bolts produced from medium carbon steel to which chromium, nickel, molybdenum, or boron were intentionally added shall be quenched only in oil from above the austenitizing temperature. Type 3 bolts shall be quenched only in oil from above the austenitizing temperature. Cold-headed Type 0 bolts shall be stress relief annealed before zinc coating to remove cold work effects such that the hardness measured anywhere on the surface or through the cross-section shall meet the requirement specified. Different tests shall be conducted in order to determine the following mechanical properties of bolts: hardness, tensile strength, and shear strength.
ASTM A394 bolts can be used for many different applications that include fastening wood, steel, and other construction materials for projects such as docks, bridges, highway structures, and buildings. ASTM A394 Hex Bolts and ASTM A394 Hex Head Bolts is some of the toughest fasteners. These ASME SA394 sturdy fasteners are used to connect heavy materials.
Bolts are externally threaded fasteners used in industrial and construction applications for assembling two unthreaded products together and available in hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. We are manufacturer & supplier of ASTM A394 studs such as All-Thread, Tap-End, Double-End Studs, and Combination Studs, different types of nuts such as Hex Nuts, Heavy Hex Nuts, Overtapped Nuts, Tommy Hole Nuts, Spherical-Faced Nuts and Full Threaded Rods, full thread rods, bonnet bolts, Carriage Bolt in a variety of finishes and sizes from 1/2" to 3 1/2". In the petroleum and chemical industry the fully threaded stud is the most common ASTM A394 Bolt used for flanged connections. ASTM A394 Stud bolts are available in all thread pitches (UNC/UNRC – UNF/UNRF – 8UN) diameters and metric sizes.
ASTM A394 Hex Cap Screws- also known as machine bolts or hex bolts are available in various bolt grade markings and strengths. Our ASTM A394 Nut Bolts Hex Bolts, Tab Bolts, Flange Bolts, Carriage Bolts, Shoulder Bolts and T Head Bolts are used to attach machine threaded fasteners when joining materials together.
Step bolts are literally used as steps on steel communication and electrical transmission towers. These bolts are generally provided with two A194 grade 2H heavy hex nuts. One nut is tightened against the thread run out. The unthreaded shank, or step length, typically ranges from 6″ to 10″.
Portland Bolt manufactures step bolts in 5/8″ diameter and 3/4″ diameter. Step bolts are high strength and are typically manufactured to ASTM specification A449.
Step Bolt Dimensions
|Body Diameter Max||Head Diameter||Head Height|
PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
THREE SPLINT PALLET
The advantages of QBH
- QBH brand sales to the main quality assurance.
- Years of export trade management, excellent service, word-of-mouth guarantee.
- By working with TUV,escort for quality.
- Customization of non-standard parts can be made according to customer's requirements and drawings.
- For quality customers,we can provide a certain credit period.
Step bolts are used for a variety of applications, including steel communication, electrical transmission towers, tower reinforcement and a host of other fastening jobs. The best step bolts feature low carbon steel bodies and high strength and are excellent for use with heavy hex nuts. Browse through different-sized threads to sufficiently meet your fastening needs. Ensure sturdy assembly and tight fits with our step bolts.