Steel Nut Bolts
Steel Hex Bolt
Carbon Steel Bolt
High Tensile Stainless Steel Bolts
Carbon Steel Nuts
Stainless Steel Nut
Steel Flat Washer
Spring Steel Washers
Stainless Steel Washer
Fully Threaded Studs
Non Standard Fasteners
Seismic Wedge Anchors
Countersunk Head Screws
Solar Panel Fasteners
BOSSARDThis is our European partner
LiIt's a good business
ANSI Seismic Wedge Anchors
|SIZE||M10-M25 ALL KIND OF LENGTH||USE||STEEL STRUCTURE|
|SURFACE||PLAIN||PACKING||BULK Or SMALL PACKING|
ANSI Seismic Wedge Anchors,
M25 Seismic Wedge Anchors,
M10 Drawn Arc Stud Welding
ANSI ML15AL M10 to M25 Seismic Wedge Anchors
Shear Connector Weld Studs are unthreaded with an upset head. Designed to interconnect the concrete slab to the load bearing steel beams. Because of the inter connection or composite construction resists shear loading between the concrete and steel beams. Meets with AWS and all other applicable specifications. Used in all types of concrete connections. They can be welded to flat or vertical surfaces, or to the inside or outside of an angle.
Material – Low carbon steel, ASTM A29, 1010-1020. Also available in a weldable stainless steel. Type 302 is the most commonly used. Other grades available on request. Please contact us for your specific needs.
Length: Length listed is before weld. Stud diameters less than 5/8” will be approximately 1/8” shorter after weld – Stud diameters 5/8” – 3/4” will be approximately 3/16” shorter – Stud diameters 1” will be approximately 1/4” shorter after weld.
Shear Connector Mechanical Properties
|TYPE A||TYPE B|
|Tensile Strength||61,000 psi minimum||65,000 psi minimum|
|Yield Strength||49,000 psi minimum||51,000 psi minimum|
|Elongation (% in 2")||17% minimum||20% minimum|
|Elongation (% in 5x dia)||14% minimum||15% minimum|
|Reduction of Area||50% minimum||50% minimum|
Shear Connector - Arc Weld Stud
|For a quote or to order, please specify:|
|ARC SC||Specify D||Specify L||Specify|
|D||MIN L||HD||HT||FERRULE CODE|
|AISI C1015, C1018 or C1020|
|MECHANICAL PROPERTIES||Tensile||60,000 psi (min.)||Values for various grades available upon request.|
|Yield||50,000 psi (min.)|
Headed Concrete Anchors are available for welding to flat surfaces, inside angles, and outside angles. Each of these applications requires the proper style stud and ferrule, so please specify your application when ordering.
Annealing treatment ➨ wiredrawing ➨ clod forging ➨ make welding spot ➨ Packing
Materials and Chemical compstition
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
THREE SPLINT PALLET
The advantages of QBH
- QBH brand sales to the main quality assurance.
- Years of export trade management, excellent service, word-of-mouth guarantee.
- By working with TUV,escort for quality.
- Customization of non-standard parts can be made according to customer's requirements and drawings.
- For quality customers,we can provide a certain credit period.
What Are Shear Studs?
Definition of Shear Studs in Construction
Shear studs refer to the installation of steel pins or grommets, that extend out of the top flange of a steel support beam. Normally the shear studs are welded, with a spot welder, after the metal deck is installed over the supporting structural steel. The spot welder will burn through the metal deck and attach the shear stud directly to the top of the steel beam.
The purpose of the shear stud is to provide a structural connection between the poured in place concrete slab and the structural steel. This structural connection distributes any shear forces that the structure may incur. Without the shear studs in place, there is a slip plane between the concrete slab, the metal deck and the structural steel framework of the project. The structural engineer will determine, which beams will have the shear studs, the size of the studs as well as the number of studs to be installed. There are specialized subcontractors that will install the shear studs. The test for the shear studs integrity is simply striking the side of the shear stud with an iron mallet. This will ensure that the stud has been properly welded to the beam, if not, the stud will simply break off at the point of intersection with the steel beam. The stud will have failed due to a shear force.
PRODUCT APPLICATIONS AND ENGINEERING CASES