Send Message
products
NEWS DETAILS
Home > News >
CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER
Events
Contact Us
86-573-82071082
Contact Now

CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER

2022-10-12
Latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER

 

It is a great honor that our company has obtained the CE certificate of EN14399-4, which will further enhance our company's pursuit of quality.

 

latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  0latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  1latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  2

 

       Below document on structural bolting reflects the situation in Europe where two technical solutions exist to achieve the Necessary ductility of bolt/nut/washer assemblies. These solutions utilize different systems (HR and HV) of Bolt/nut/washer assemblies.Both systems are well proved and it is up to the experts responsible for Structuring bolting whether they use the one or the other system.

 

      However, important for the performance of the assembly to avoid mixing up the components of both systems. Therefore, the bolts and nuts for both systems are standardized in one single part of this European Standard each And the marking of the components of the same system is uniform.

 

 

 

Technical Conditions
  Bolt/nut/washer assembly System HR Bolt/nut/washer assembly System HV
General Requirements EN 14399-1
Bolt/nut assembly EN 14399-3 EN 14399-4
Marking HR HV
Property classes 8.8/8 10.9/10 10.9/10
Washer(s) EN 14399-5 or EN 14399-6 EN 14399-5 or EN 14399-6
Marking H H
Suitability test for preloading EN 14399-2 EN 14399-2
products
NEWS DETAILS
CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER
2022-10-12
Latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER

 

It is a great honor that our company has obtained the CE certificate of EN14399-4, which will further enhance our company's pursuit of quality.

 

latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  0latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  1latest company news about CE CERTIFICATTE OF EN14399-4 FROM QBH FASTENER  2

 

       Below document on structural bolting reflects the situation in Europe where two technical solutions exist to achieve the Necessary ductility of bolt/nut/washer assemblies. These solutions utilize different systems (HR and HV) of Bolt/nut/washer assemblies.Both systems are well proved and it is up to the experts responsible for Structuring bolting whether they use the one or the other system.

 

      However, important for the performance of the assembly to avoid mixing up the components of both systems. Therefore, the bolts and nuts for both systems are standardized in one single part of this European Standard each And the marking of the components of the same system is uniform.

 

 

 

Technical Conditions
  Bolt/nut/washer assembly System HR Bolt/nut/washer assembly System HV
General Requirements EN 14399-1
Bolt/nut assembly EN 14399-3 EN 14399-4
Marking HR HV
Property classes 8.8/8 10.9/10 10.9/10
Washer(s) EN 14399-5 or EN 14399-6 EN 14399-5 or EN 14399-6
Marking H H
Suitability test for preloading EN 14399-2 EN 14399-2
Sitemap |  Privacy Policy | China Good Quality Steel Nut Bolts Supplier. Copyright © 2020-2024 Jiaxing City Qunbang Hardware Co., Ltd . All Rights Reserved.