|
| MOQ: | 900kg |
| Price: | Negotiation |
| Standard Packaging: | 25KG/CTN,36CTN/PALLET or small packing |
| Delivery Period: | 30DAYS |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 500TON/MONTH |
ASME SS 304 316 3inch Stainless Steel Studs And Nuts
Specification
Combine these setup studs with T-slot nuts, flanged nuts, setup clamps, or setup blocks to clamp and hold workpieces, vises, and other objects onto your fixturing table. Also known as double-ended studs, they have threads on both ends. One end threads into a T-slot nut or flanged nut inside the table. The other end passes through a setup clamp and secures with a nut and washer. The middle of the stud is unthreaded for gripping and adjusting the stud.
These setup studs are also used to align parts during assembly. One end of the stud is threaded into the part being added, and the other end fits into the mounting hole of the mating part. Because the studs don't have a head, you have the option to thread them into holes from either end, but they require a nut. You can adjust the distance between the mating parts by tightening and loosening the nut.
18-8 stainless steel studs resist corrosion in humid, damp, and washdown environments, and they're nearly as strong as steel studs.
316 stainless steel studs are the most corrosion-resistant studs we offer. They resist rusting even when exposed to salt water, chlorine solutions, and other chemicals.
Some of these studs meet DIN dimensional and material standards so designers and engineers know that they're compatible with other parts and tools.
|
||||||||||||||||||
|
||||||||||||||||||
Screw Thread
d
| 1-1/2 | 1-5/8 | 1-3/4 | 1-7/8 | 2 | 2-1/4 | 2-1/2 | 2-3/4 | 3 | 3-1/4 | 3-1/2 | 3-3/4 | 4 |
| d | |||
| b | min | ||
| U | max | ||
| ds | |||
| Full body,min | |||
| ds1 | Reduced body,max | ||
| Reduced body,min | |||
Materials and Chemical compstition
| 化学成分CHEMICAL COMPOSI(% ) | ||||||||||
| Type | C碳 | Si硅 | Mn锰 | P磷 | S硫 | Ni镍 | Cr铬 | Mo钼 | Cu铜 | Others |
| ≤ | ≤ | ≤ | ≤ | ≤ | ≥ | ≥ | ≥ | ≈ | ||
| 201Cu | 0.08 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 14.0-17.0 | 2.0-3.0 | ||
| 201 | 0.15 | 1.00 | 8.50 | 0.06 | 0.03 | 3.50-5.50 | 16.0-18.0 | N≤0.25 | ||
| 130M/202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | N≤0.25 | ||
| 202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | |||
| 301 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 5.00-8.00 | 16.0-18.0 | |||
| 302 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | |||
| XM7 (302HQ) |
0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.5 | 17.0-9.00 | 3.0-4.0 | ||
| 303 | 0.15 | 1.00 | 2.00 | 0.20 | ≥0.15 | 8.00-10.0 | 17.0-19.0 | ≤0.60 | ||
| 303Cu | 0.15 | 1.00 | 3.00 | 0.20 | ≥0.15 | 8.0-10.0 | 17.0-19.0 | ≤0.60 | 1.5-3.5 | |
| 304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 18.0-20.0 | |||
| 304H | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 18.0-20.0 | |||
| 304HC | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | 2.0-3.0 | ||
| 304HCM | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 17.0-19.0 | 2.5-4.0 | ||
| 304L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 9.0-13.0 | 18.0-20.0 | |||
| 304M | 0.06 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.0 | 18.0-20.0 | |||
| 305 | 0.12 | 1.00 | 2.00 | 0.045 | 0.03 | 10.5-13.0 | 17.0-19.0 | |||
| 305J1 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 11.0-13.5 | 16.5-19.0 | |||
| 309S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 22.0-14.0 | |||
| 310S | 0.08 | 1.50 | 2.00 | 0.045 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
| 314 | 0.25 | 15.-3.0 | 2.00 | 0.040 | 0.03 | 19.0--22.0 | 24.0-26.0 | |||
| 316 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
| 316Cu | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 2.0-3.0 | |
| 316L (12Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | ||
| 316L (10Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
| 321 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 9.00-13.0 | 17.0-19.0 | Ti≤5*C% | ||
| 410 | 0.15 | 1.00 | 0.03 | 11.5-13.5 | ||||||
| 416 | 0.15 | 1.25 | ≥0.15 | 12.0-14.0 | ||||||
| 420 | 0.26-0.4 | 1.00 | 0.03 | 12.0-14.0 | ||||||
| 410L | 0.30 | 1.00 | 1.00 | 0.040 | 0.03 | 11.5-13.5 | ||||
| 430 | 0.12 | 0.75 | 1.00 | 0.040 | 0.03 | 16.0-18.0 | ||||
| 430F | 0.12 | 1.00 | 1.25 | 0.060 | 0.15 | 16.0-18.0 | ||||
| 631(J1) | 0.09 | 1.00 | 1.00 | 0.040 | 0.03 | 6.50-8.50 | 16.0-18.0 | AL 0.75-1.5 | ||
| 2520 | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
| 410 | 0.015 | 1.00 | 1.00 | 0.04 | 0.03 | 11.5-13.5 | ||||
PACKING
QBH BULK
20-25KG/CTN,36CTNS/PALLET
20-30KG/BAGS,36BAGS/PALLET
ONE TON/BOXES
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
EURO Pallet
THREE SPLINT PALLET
WOODEN BOX
The advantages of QBH
Video
Video
Video
Video
|
|
| MOQ: | 900kg |
| Price: | Negotiation |
| Standard Packaging: | 25KG/CTN,36CTN/PALLET or small packing |
| Delivery Period: | 30DAYS |
| Payment Method: | L/C, T/T |
| Supply Capacity: | 500TON/MONTH |
ASME SS 304 316 3inch Stainless Steel Studs And Nuts
Specification
Combine these setup studs with T-slot nuts, flanged nuts, setup clamps, or setup blocks to clamp and hold workpieces, vises, and other objects onto your fixturing table. Also known as double-ended studs, they have threads on both ends. One end threads into a T-slot nut or flanged nut inside the table. The other end passes through a setup clamp and secures with a nut and washer. The middle of the stud is unthreaded for gripping and adjusting the stud.
These setup studs are also used to align parts during assembly. One end of the stud is threaded into the part being added, and the other end fits into the mounting hole of the mating part. Because the studs don't have a head, you have the option to thread them into holes from either end, but they require a nut. You can adjust the distance between the mating parts by tightening and loosening the nut.
18-8 stainless steel studs resist corrosion in humid, damp, and washdown environments, and they're nearly as strong as steel studs.
316 stainless steel studs are the most corrosion-resistant studs we offer. They resist rusting even when exposed to salt water, chlorine solutions, and other chemicals.
Some of these studs meet DIN dimensional and material standards so designers and engineers know that they're compatible with other parts and tools.
|
||||||||||||||||||
|
||||||||||||||||||
Screw Thread
d
| 1-1/2 | 1-5/8 | 1-3/4 | 1-7/8 | 2 | 2-1/4 | 2-1/2 | 2-3/4 | 3 | 3-1/4 | 3-1/2 | 3-3/4 | 4 |
| d | |||
| b | min | ||
| U | max | ||
| ds | |||
| Full body,min | |||
| ds1 | Reduced body,max | ||
| Reduced body,min | |||
Materials and Chemical compstition
| 化学成分CHEMICAL COMPOSI(% ) | ||||||||||
| Type | C碳 | Si硅 | Mn锰 | P磷 | S硫 | Ni镍 | Cr铬 | Mo钼 | Cu铜 | Others |
| ≤ | ≤ | ≤ | ≤ | ≤ | ≥ | ≥ | ≥ | ≈ | ||
| 201Cu | 0.08 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 14.0-17.0 | 2.0-3.0 | ||
| 201 | 0.15 | 1.00 | 8.50 | 0.06 | 0.03 | 3.50-5.50 | 16.0-18.0 | N≤0.25 | ||
| 130M/202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | N≤0.25 | ||
| 202 | 0.15 | 1.00 | 7.5-10 | 0.06 | 0.03 | 4.00-6.00 | 17.0-19.0 | |||
| 301 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 5.00-8.00 | 16.0-18.0 | |||
| 302 | 0.15 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | |||
| XM7 (302HQ) |
0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.5 | 17.0-9.00 | 3.0-4.0 | ||
| 303 | 0.15 | 1.00 | 2.00 | 0.20 | ≥0.15 | 8.00-10.0 | 17.0-19.0 | ≤0.60 | ||
| 303Cu | 0.15 | 1.00 | 3.00 | 0.20 | ≥0.15 | 8.0-10.0 | 17.0-19.0 | ≤0.60 | 1.5-3.5 | |
| 304 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 18.0-20.0 | |||
| 304H | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 18.0-20.0 | |||
| 304HC | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.00-10.0 | 17.0-19.0 | 2.0-3.0 | ||
| 304HCM | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 8.0-10.0 | 17.0-19.0 | 2.5-4.0 | ||
| 304L | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 9.0-13.0 | 18.0-20.0 | |||
| 304M | 0.06 | 1.00 | 2.00 | 0.045 | 0.03 | 8.50-10.0 | 18.0-20.0 | |||
| 305 | 0.12 | 1.00 | 2.00 | 0.045 | 0.03 | 10.5-13.0 | 17.0-19.0 | |||
| 305J1 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 11.0-13.5 | 16.5-19.0 | |||
| 309S | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 22.0-14.0 | |||
| 310S | 0.08 | 1.50 | 2.00 | 0.045 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
| 314 | 0.25 | 15.-3.0 | 2.00 | 0.040 | 0.03 | 19.0--22.0 | 24.0-26.0 | |||
| 316 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
| 316Cu | 0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | 2.0-3.0 | |
| 316L (12Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 | ||
| 316L (10Ni) |
0.03 | 1.00 | 2.00 | 0.045 | 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 | ||
| 321 | 0.08 | 1.00 | 2.00 | 0.045 | 0.03 | 9.00-13.0 | 17.0-19.0 | Ti≤5*C% | ||
| 410 | 0.15 | 1.00 | 0.03 | 11.5-13.5 | ||||||
| 416 | 0.15 | 1.25 | ≥0.15 | 12.0-14.0 | ||||||
| 420 | 0.26-0.4 | 1.00 | 0.03 | 12.0-14.0 | ||||||
| 410L | 0.30 | 1.00 | 1.00 | 0.040 | 0.03 | 11.5-13.5 | ||||
| 430 | 0.12 | 0.75 | 1.00 | 0.040 | 0.03 | 16.0-18.0 | ||||
| 430F | 0.12 | 1.00 | 1.25 | 0.060 | 0.15 | 16.0-18.0 | ||||
| 631(J1) | 0.09 | 1.00 | 1.00 | 0.040 | 0.03 | 6.50-8.50 | 16.0-18.0 | AL 0.75-1.5 | ||
| 2520 | 0.08 | 1.00 | 2.00 | 0.035 | 0.03 | 19.0-22.0 | 24.0-26.0 | |||
| 410 | 0.015 | 1.00 | 1.00 | 0.04 | 0.03 | 11.5-13.5 | ||||
PACKING
QBH BULK
20-25KG/CTN,36CTNS/PALLET
20-30KG/BAGS,36BAGS/PALLET
ONE TON/BOXES
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
EURO Pallet
THREE SPLINT PALLET
WOODEN BOX
The advantages of QBH
