-
Steel Nut Bolts
-
Steel Hex Bolt
-
Carbon Steel Bolt
-
High Tensile Stainless Steel Bolts
-
Carbon Steel Nuts
-
Stainless Steel Nut
-
Steel Flat Washer
-
Spring Steel Washers
-
Stainless Steel Washer
-
Fully Threaded Studs
-
Non Standard Fasteners
-
Seismic Wedge Anchors
-
Self Tapping Screw
-
Electrical Fasteners
-
Solar Panel Fasteners
-
Stainless Steel Shackle
-
BOSSARDThis is our European partner
-
LiIt's a good business
Metric DIN 936 Thin Nut Low Profile Hex Nut 17H M8 To M52 Carbon Steel Nuts

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xStandard | DIN936 | Material | Carbon Steel |
---|---|---|---|
Size | M8-M52 | Grade | 04 05 |
Finish | ZP BLACK YZP HDG | Sample | Free Samples |
Advantage | We Can Manufacture According To Client Design,OEM / ODM / Customized Service Provided | Oem | Yes,welcome |
Thread | Coarse Thread And Fine Thread | Package | Individualized Packaging |
High Light | UNI 5589 Carbon Steel Nuts,17H Carbon Steel Nuts,DIN 936 Low Profile Hex Nut |
Specification
Metric DIN 936 Low Profile Hex Nuts are similar to a hex jam nut (DIN 439) but with slightly different heights. They are thin hex nuts about half as thick as a regular hex nut. They are often used as lock nuts, where they are threaded up against a standard nut locking it in place or in any circumstance where a standard nut is too thick for an application, a hex jam nut can be a very useful alternative. QBH Fasteners can produce M8 to M52 in both A2 and A4 stainless steel as well as brass and steel zinc.
DIN 936 - Hex nuts, low type
Current norm: DIN 936
Equivalent norms: ISO 4035; CSN 021403; PN 82153; UNI 5589; EU 24035;
Legend:
s - size of the hexagon
m - height of the nut
d - the nominal diameter of the thread
Makings:QBH
Steel: 14H, 17H, 22H
Stainless: A2,A4
Plastic: -
Non Ferrous: Brass
Thread: 6H
Table according to DIN 936:
dimensions in mm
Thread d | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | |
M8x1 | M10x1 | M12x1,25 | M14x1,5 | M16x1,5 | M18x1,5 | M20x1,5 | M22x1,5 | M24x1,5 | ||
- | M10x1,25 | M12x1,5 | - | - | M18x2 | M20x2 | M22x2 | M24x2 | ||
P | 1,25 | 1 | 1,75 | 2 | 2 | 2,5 | 2,5 | 2,5 | 3 | |
da | min. | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
max | 8,75 | 10,8 | 13 | 15,1 | 17,3 | 19,5 | 21,6 | 23,7 | 25,9 | |
dw | min. | 11,3 | 15,3 | 17,2 | 20,2 | 22,2 | 25,3 | 28,2 | 29,5 | 33,2 |
e | min. | 14,38 | 18,9 | 21,1 | 24,49 | 26,75 | 29,56 | 32,95 | 35,03 | 39,55 |
m | nominal=max. | 5 | 6 | 7 | 8 | 8 | 9 | 9 | 10 | 10 |
min. | 4,7 | 5,7 | 6,64 | 7,42 | 7,42 | 8,42 | 8,1 | 9,1 | 9,1 | |
m´ | min. | 3,8 | 4,6 | 5,3 | 5,9 | 5,9 | 6,7 | 6,5 | 7,3 | 7,3 |
s | nominal=max. | 13 | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 |
min. | 12,73 | 16,73 | 18,67 | 21,67 | 23,67 | 26,16 | 29,16 | 31 | 35 | |
Weight (7,85 kg/dm3) kg/1000pcs | 4 | 8,6 | 12,1 | 18,2 | 20,1 | 29,6 | 36,3 | 43,8 | 58 |
Thread d | M27 | M30 | M33 | M36 | M39 | M42 | (M45) | M48 | M52 | |
M27x1,5 | M30x1,5 | M33x1,5 | M36x1,5 | M39x1,5 | M42x1,5 | M45x1,5 | M48x1,5 | M52x1,5 | ||
M27x2 | M30x2 | M33x2 | M36x2 | M39x2 | M42x2 | M45x2 | M48x2 | M52x2 | ||
- | - | - | M36x3 | M39x3 | M42x3 | M45x3 | M48x3 | M52x3 | ||
P | 3 | 3,5 | 3,5 | 4 | 4 | 4,5 | 4,5 | 5 | 5 | |
da | min. | 27 | 30 | 33 | 36 | 39 | 42 | 45 | 48 | 52 |
max | 29,1 | 32,4 | 35,6 | 38,9 | 42,1 | 45,4 | 48,6 | 51,8 | 56,2 | |
dw | min. | 38 | 42,7 | 46,6 | 51,1 | 55,9 | 60,6 | 64,7 | 69,4 | 74,2 |
e | min. | 45,2 | 50,85 | 55,37 | 60,79 | 66,44 | 71,3 | 76,95 | 82,6 | 88,25 |
m | nominal=max. | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 |
min. | 10,9 | 10,9 | 12,9 | 12,9 | 14,9 | 14,9 | 16,9 | 16,9 | 18,7 | |
m´ | min. | 8,7 | 8,7 | 10,3 | 10,3 | 11,9 | 11,9 | 13,5 | 13,5 | 15 |
s | nominal=max. | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
min. | 40 | 45 | 49 | 53,8 | 58,8 | 63,1 | 68,1 | 73,1 | 78,1 | |
Weight (7,85 kg/dm3) kg/1000pcs | 90 | 110 | 155 | 190 | 260 | 307 | 400 | 460 | 580 |
Process flow
Cold forging
Annealing treatment(if need) ➨ wiredrawing ➨ clod forging ➨ tapping ➨make heat treatment(if need) ➨ Finish ➨ Packing
Hot forging
Cutting material ➨ hot forging ➨ turning ➨ tapping ➨ make heat treatment(if need) ➨ Finish ➨ Packing
Product Grade
Class 04 Class 05
Materials and Chemical compstition
1008
CHEMICAL COMPOSI % | ||||||||
C | Si | Mn | P | S | Cr | Ni | Cu | Al |
0.06 | 0.06 | 0.33 | 0.013 | 0.003 | 0.01 | 0 | 0.01 | 0.028 |
1035
CHEMICAL COMPOSI % | |||||||
C | Si | Mn | P | S | Cr | Ni | Cu |
0.34 | 0.13 | 0.73 | 0.012 | 0.002 | 0.02 | 0.01 | 0.02 |
10B21
CHEMICAL COMPOSI % | ||||||
C | Si | Mn | P | S | Cr | B |
0.2 | 0.04 | 0.81 | 0.017 | 0.007 | 0.017 | 0.0021 |
1045
CHEMICAL COMPOSI % | |||||||
C | Si | Mn | P | S | Cr | Ni | Cu |
0.45 | 0.23 | 0.58 | 0.014 | 0.006 | 0.057 | 0.008 | 0.016 |
40CR
CHEMICAL COMPOSI % | |||||||
C | Si | Mn | P | S | Cr | Ni | Cu |
0.4 | 0.21 | 0.54 | 0.015 | 0.008 | 0.95 | 0.02 | 0.02 |
35CRMO
CHEMICAL COMPOSI % | ||||||||
C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
0.35 | 0.22 | 0.59 | 0.01 | 0.003 | 0.93 | 0.01 | 0.01 | 0.21 |
42CRMO
CHEMICAL COMPOSI % | ||||||||
C | Si | Mn | P | S | Cr | Ni | Cu | Mo |
0.42 | 0.27 | 0.92 | 0.013 | 0.004 | 1.01 | 0.03 | 0.04 | 0.2 |
Finish
PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON
PACKING
1,QBH BULK
20-25KG/CTN,36CTNS/PALLET
20-30KG/BAGS,36BAGS/PALLET
ONE TON/BOXES
50KG/ IRON DRUM,12 IRON DRUMS/PALLET
2,QBH SMALL PACKING
Packing in small boxes according to customer’s requirements
Packing in plastic bag according to customer’s requirements
3,QBH PALLET TYPE
SOLID WOOD FUMIGATION PALLET
EURO Pallet
THREE SPLINT PALLET
WOODEN BOX
MECHANICAL PROPERTY
TESTING STANDARD:DIN267- 4 OR ISO898-2
SIZE | CLASS | |||||||||||||||||
04 | 05 | |||||||||||||||||
PROOF LOAD N/mm2 |
HV |
NUT | PROOF LOAD N/mm2 |
HV |
NUT | |||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | min | max | HEAT TREATMENT | TYPE | |||||||||
/ | M4 | 380 | 188 | 302 | NO | THIN NUT | 500 | 272 | 353 | YES | THIN NUT | |||||||
M4 | M7 | |||||||||||||||||
M7 | M10 | |||||||||||||||||
M10 | M16 | |||||||||||||||||
M16 | M39 | |||||||||||||||||
SIZE | CLASS | |||||||||||||||||
4 | 5 | |||||||||||||||||
PROOF LOAD N/mm2 |
HV | NUT | PROOF LOAD N/mm2 |
HV | NUT | |||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | min | max | HEAT TREATMENT | TYPE | |||||||||
/ | M4 | / | / | / | / | / | 520 | 130 | 302 | NO | 1 | |||||||
M4 | M7 | 580 | ||||||||||||||||
M7 | M10 | 590 | ||||||||||||||||
M10 | M16 | 610 | ||||||||||||||||
M16 | M39 | 510 | 117 | 302 | NO | 1 | 630 | 146 | ||||||||||
SIZE | CLASS | |||||||||||||||||
6 | 8 | |||||||||||||||||
PROOF LOAD N/mm2 |
HV | NUT | PROOF LOAD N/mm2 |
HV | NUT | |||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | min | max | HEAT TREATMENT | TYPE | |||||||||
/ | M4 | 600 | 150 | 302 | NO | 1 | 800 | 180 | 302 | NO | 1 | |||||||
M4 | M7 | 670 | 855 | 200 | ||||||||||||||
M7 | M10 | 680 | 870 | |||||||||||||||
M10 | M16 | 700 | 880 | |||||||||||||||
M16 | M39 | 720 | 170 | 920 | 233 | 353 | YES | |||||||||||
SIZE | CLASS | |||||||||||||||||
8 | 9 | |||||||||||||||||
PROOF LOAD N/mm2 |
HV | NUT | PROOF LOAD N/mm2 |
HV | NUT | |||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | min | max | HEAT TREATMENT | TYPE | |||||||||
/ | M4 | / | / | / | / | / | 900 | 170 | 302 | NO | 2 | |||||||
M4 | M7 | 915 | 188 | |||||||||||||||
M7 | M10 | 940 | ||||||||||||||||
M10 | M16 | 950 | ||||||||||||||||
M16 | M39 | 890 | 180 | 302 | NO | 2 | 920 | |||||||||||
SIZE | CLASS | |||||||||||||||||
10 | 12 | |||||||||||||||||
PROOF LOAD N/mm2 |
HV | NUT | PROOF LOAD N/mm2 |
HV | NUT | |||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | min | max | HEAT TREATMENT | TYPE | |||||||||
/ | M4 | 1040 | 272 | 353 | YES | 1 | 1140 | 295 | 353 | YES | 1 | |||||||
M4 | M7 | 1040 | 1140 | |||||||||||||||
M7 | M10 | 1040 | 1140 | |||||||||||||||
M10 | M16 | 1050 | 1140 | |||||||||||||||
M16 | M39 | 1060 | / | / | / | / | / | |||||||||||
SIZE | CLASS | |||||||||||||||||
12 | ||||||||||||||||||
PROOF LOAD N/mm2 |
HV | NUT | ||||||||||||||||
> | ≤ | min | max | HEAT TREATMENT | TYPE | |||||||||||||
/ | M4 | 1150 | 272 | 353 | YES | 2 | ||||||||||||
M4 | M7 | 1150 | ||||||||||||||||
M7 | M10 | 1160 | ||||||||||||||||
M10 | M16 | 1190 | ||||||||||||||||
M16 | M39 | 1200 |
The advantages of QBH
- QBH brand sales to the main quality assurance.
- Years of export trade management, excellent service, word-of-mouth guarantee.
- By working with TUV,escort for quality.
- Customization of non-standard parts can be made according to customer's requirements and drawings.
- For quality customers,we can provide a certain credit period.
Product application
Product application
DIN 936 hexagon nut is used in the fields of machine construction, instrumentation and construction for fastening with various metric elements of structural details. It is made of steel, galvanized steel and A2 / A4 steel with anti-corrosion properties.
Benefits
DIN 936 Nuts are Jam Nut (Hexagon Nuts).
Made of high-tech steel with anti-corrosion coating.
Provides high reliability and strength of the resulting connection.
Easy to use, does not require the use of specialized equipment.
Provides a simple and fast installation / dismantling.
Does not allow deformation of the connection.
Can be used in conditions of limited working space.
Fully complies not only with European, but with domestic quality standards and regulations.
Analogues
DIN 439; GOST 5916, ISO 4035, 8675.
Operation
The DIN 936 nut is used in conjunction with bolts, studs and other fasteners of the appropriate caliber.