F959M Tension Indicating Washer

Place of Origin CHINA
Brand Name QBH
Certification ISO9001
Model Number EN14399-9 F959M M12-M36
Minimum Order Quantity 500kg
Price 2000USD-1500USD/TON
Packaging Details 25KG/CTN,36CTN/PALLET or small packing
Delivery Time 30DAYS
Payment Terms L/C, T/T,OA
Supply Ability 300TON/MONTH
Product Details
Standard F959M EN14399-9 Material Carbon Steel Stainless Steel
Size M12-M36 Packing Carton And Pallet Or According To The Customer's Requirement
Sample Free Sample Thread Mushroom Head Square Neck
Lead Time Per On Order Quantity Advantage We Can Manufacture According To Client Design,OEM / ODM / Customized Service Provided
Oem Yes,welcome
High Light

Compressible Tension Indicating Washer

,

F959M Tension Indicating Washer

,

F959M Direct Tension Indicator Washer

Leave a Message
Product Description

F959M Tension Indicating Washer

 

Specification

 

HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES

High strength structural bolting for preloading

Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies

 

 

For Nominal Thread Diameter
M12 M16 M20 M22 M24 M27 M30 M36
d1 min
max
d2 min
max
h1 min
h2 max
h3 min
d3 max
d4 min
12.75 16.75 20.95 23.05 25.15 28.3 31.45 37.75
12.85 16.85 21.05 23.15 25.25 28.4 31.55 37.85
26 35 41 46.5 50 54 59 78
32.5 36.8 46 50.6 55.2 62.1 69 83
2.5 3 3.5 4 4 4 4 4
5.5 6 6.5 7 7 7 7 7.5
0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8
20 25 29 33 38 43 46.5 56
13.85 17.85 22.05 24.15 26.25 29.4 32.55 38.85

 

F959M Tension Indicating Washer 0

 

 

 

 

 

 

 

INSTALL AND USE

 

 

THEORY OF PRELOADED BOLTING ASSEMBLIES The principle of Preloaded bolted connections relies upon tensioning each bolt in the connection to a specified minimum preload so that the required clamping force will be induced at the connection interface. Shear loads are then transferred by frictional resistance at the joint interface rather than by bearing on the bolt shanks and hole faces. In this type of connection there will be no movement of the connected materials when the connection is subjected to these loads.

F959M Tension Indicating Washer 1

 

 

 

 

When axial tensile loads are applied to the bolt through the bolted connection, preloading of the connection to a specified minimum is also important, particularly if the loads are cyclical and could induce loosening or fatigue failure of the bolts. The clamping force developed at the specified minimum bolt preload should be greater than the applied loads. This will prevent the plies from separating or the bolts from developing any significant increase in axial tensile stress over the installed preload stress.

F959M Tension Indicating Washer 2

TIGHTENING OF PRELOADED ASSEMBLIES The essential requirement for preloaded connections is that the individual bolts are correctly tightened to the specified minimum preload; EN 1993.1.8 (Eurocode 3) specifies that to develop the necessary clamp force in the connection each bolt must be preloaded to 70% of the nominal bolt tensile strength. The permitted methods of preloading in EN 1090-2 are dependent on either movement of the nut along the bolt thread by a specified amount or the application of a calculated value of torque (turning moment) to the nut. Methods that depend on displacement of the nut: 1. The DTI method depends on the deformation of protrusions that have been extruded from the face of a washer. The DTI is calibrated so that when a specified average gap is reached the required preload is achieved. 2. The Highways Agency part-turn method requires each bolt to be tightened by torque to bring the steelwork into contact (each bolt diameter uses a different torque value). A part-turn, a minimum of a half turn, is then applied to develop the required preload. Methods that depend on the application of torque: 1. The Combined method requires the bolt to be torqued to 75% of the required preload; the required torque is calculated from data obtained from the EN 14399-2 – Fitness for Purpose test. A small part-turn, less than one third turn, is then applied to develop the required preload. 2. The Torque Control method again uses a value of torque calculated from data obtained from the EN 14399-2 – Fitness for Purpose test. 3. The bolts with the HRC method (TC bolts) are tightened using a special wrench where the nut is rotated while reacting against the splined bolt end. The HRC bolts are calibrated so that when the nut stops rotating the spline shears at a breakneck and the required preload is achieved.

 

F959M Tension Indicating Washer 3

 

 

 

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

 

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

 

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

 

 

 

The advantages of QBH

  •  QBH brand sales to the main quality assurance.
  •  Years of export trade management, excellent service, word-of-mouth guarantee.
  •  By working with TUV,escort for quality.
  •  Customization of non-standard parts can be made according to customer's requirements and drawings.
  •  For quality customers,we can provide a certain credit period.