ASTM F436M-11 Hardened Steel Washers Metric M90 M64 ZINC HDG BLACK

Place of Origin CHINA
Brand Name QBH
Certification ISO9001
Model Number F436M M90 M64
Minimum Order Quantity 900kg
Price 1300USD/TON
Packaging Details 25kg Carton+900kg/Pallet or 5KG/CTN
Delivery Time 30DAYS
Payment Terms L/C, T/T
Supply Ability 200TON/MONTH
Product Details
Material Carbon Steel Size M64-M90
Surface Treatment BLACK Grade F436M
Process Stamping Sample Free Sample
Packaging 25kg Carton+900kg/Pallet
High Light

ZINC HDG BLACK Hardened Steel Washers

,

Metric Hardened Steel Washers

,

M90 Steel Flat Washer

Leave a Message
Product Description

ASTM F436M-11 Hardened Steel Washers [Metric] M90 M64 Big Washer BLACK

F436M ANSI Carbon Steel ZINC HDG BLACK Steel Flat Washer

 

 

Materials and Chemical compstition

 

1045

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu
0.45 0.23 0.58 0.014 0.006 0.057 0.008 0.016
 

ASTM F436M-11 Hardened Steel Washers Metric M90 M64 ZINC HDG BLACK 0

 

 

ASTM F436M-11 Hardened Steel Washers Metric M90 M64 ZINC HDG BLACK 1

ASTM F436M-11 Hardened Steel Washers Metric M90 M64 ZINC HDG BLACK 2

Withdrawn Rationale:

This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100.

Formerly under the jurisdiction of Committee F16 on Fasteners, this specification was withdrawn in September 2016 and replaced by Specification F436/F436M for Hardened Steel Washers Inch and Metric Dimensions.1

 

1. Scope

 

1.1 This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers for use with fasteners having nominal thread diameters M12 through M100. These washers are intended for general-purpose mechanical and structural use with bolts, nuts, studs, and other internally and externally threaded fasteners. These washers are suitable for use with fasteners covered in Specifications A325M, A490M, A563Mand with fasteners of Specification F568M property classes 8.8 and higher.

1.2 The types of washers covered in this specification are:

1.2.1 Type 1Washers made of carbon steel.

1.2.2 Type 3Washers made of steel having atmospheric corrosion resistance and weathering characteristics comparable to that of steels covered in Specifications A242/A242M, A588/A588M, and A709/A709M. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition. See 5.1. When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.

1.2.3 This specification provides for furnishing Type 3 to chemical composition or a Corrosion Resistance Index (CRI) of 6 or higher at the suppliers option.

1.3 The styles of washers covered in this specification are:

1.3.1 Circular WashersCircular washers in nominal sizes 12 mm through 100 mm, are suitable for applications where sufficient space exists and angularity permits.

1.3.2 Beveled WashersBeveled washers are square and rectangular, in nominal sizes 12 mm through 36 mm, with a beveled 1:6 surface for use with American Standard beams and channels.

1.3.3 Clipped WashersClipped washers are circular or beveled for use where space limitations necessitate that one side be clipped.

1.4 Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1—This specification is the metric counterpart of Specification F436.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

 


2. Referenced Documents (purchase separately)

 

A153/A153M Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A242/A242M Specification for High-Strength Low-Alloy Structural Steel

A325M Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

A490M Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

A563M Specification for Carbon and Alloy Steel Nuts (Metric)

A588/A588M Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

A709/A709M Specification for Structural Steel for Bridges

A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

B695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

D3951 Practice for Commercial Packaging

F436 Specification for Hardened Steel Washers

F568M Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)

F606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

F1136M Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners (Metric)

F1470 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

F1789 Terminology for F16 Mechanical Fasteners

G101 Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

ANSI Standard

B 18.23.2M Metric Beveled Washers

 

 

PACKING

 

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

 

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

 

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

 

 

 

The advantages of QBH

  • QBH brand sales to the main quality assurance.
  • Years of export trade management, excellent service, word-of-mouth guarantee.
  • By working with TUV,escort for quality.
  • Customization of non-standard parts can be made according to customer's requirements and drawings.
  • For quality customers,we can provide a certain credit period.

 

 

FAQ


1. How do you let me trust you.
 
Jiaxing City Qunbang Hardware Co.,ltd hs its own right of import and export,QBH trademark in China,United States,European Union have been registered.At the same time,you can also check the registration information of our company in the China industry and Commerce system.
 
 
2. How about your price.
 
We will be based on different markets,for different quality and quantity,tailor-made prices for customers,in order to achieve win-win goal.
 
 
3. How do you control your quality.
 
Incoming quality contral( IQC)→Process Quality control(PQC)→Output quality control(OQC),and the random samples is sent to TUV for testing.If the customer received the goods and found quality problems,QBH company promises to be responsible for returning money or replenishing the goods
 
 
4. Could you provide free samples?
 
For new customer, We can provide free samples for standard fastener, But the clients will pay the express
charges. For old customer, We will send you free samples and pay express charges by ourself.
 
 
5. Do you accept small order?
 
QBH company can accept small orders if we have them in stock.Generally speaking,the stock probability of stainless steel fasteners is higher than that of carbon steel fasteners.
 
 
6. How about your delivery time
 
What we pursure is the high efficiency movement pattern,the stainless steel fastener delivery time about 15days,the carbon steel fastener will it about 30days
 
 
7. What is your packing.
 
Usually 25KG/carbon,36CTNS on the pallets,or 20-30kg/Bags,then on the pallet,QBH company personalized packagingis also available,like 10PCS/plastic bag or 10pcs/box,it can print some information
such as LOGO and pattern of customers.
 
 
8. What is your payment term
 
Normally,our terms of payment are TT and L/C,if we cooperate for a long time,we can reach the point of mutual trust,and fully support our customers to become bigger and stronger in the local market.
Not only in the price concessions,but also in the payment can also be made on credit,Specific credit sales time needs to be negotiated separately