A354 ANSI Carbon Steel HDG Fully Threaded Studs

Place of Origin CHINA
Brand Name QBH
Certification ISO9001
Model Number 1/4--4inch
Minimum Order Quantity 500KG
Price 800USD-2250USD/TON
Packaging Details BULK or according customer requirement
Delivery Time 30days
Payment Terms L/C, T/T,OA
Supply Ability 600TON/MONTH
Product Details
Material Carbon Steel SIZE 1/4-4INCH
LENGTH ALL KIND OF LENGTH Surface HDG YZP ZP BLACK
Samples Free
High Light

A354 Fully Threaded Studs

,

HDG Fully Threaded Studs

,

ANSI 1 Inch All Thread Rod

Leave a Message
Product Description

A354 ANSI Carbon Steel HDG 1 Inch All Thread Rod

 

ASTM A354 covers the chemical and mechanical requirements of quenched and tempered alloy steel bolts, studs, and other externally threaded fasteners 4” and under in diameter. Two strength levels, grades BC and BD are summarized below. This specification is unrestricted in its configuration and can be a headed bolt, bent bolt, or threaded rod.

 

 

 

 

 

 

Screw Thread
d
1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8
d
PP UNC
UNF
8UN
u max UNC
UNF
8UN
0.2500 0.3125 0.3750 0.4375 0.5000 0.5625 0.6250 0.7500 0.8750 1.0000 1.1250 1.2500 1.3750
20 18 16 14 13 12 11 10 9 8 7 7 6
28 24 24 20 20 18 18 16 14 12 12 12 12
- - - - - - - - - - 8 8 8
0.100 0.111 0.125 0.143 0.154 0.167 0.182 0.200 0.222 0.250 0.286 0.286 0.333
0.071 0.083 0.083 0.100 0.100 0.111 0.111 0.125 0.143 0.167 0.167 0.167 0.167
- - - - - - - - - - 0.250 0.250 0.250
Screw Thread
d
1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4
d
PP UNC
UNF
8UN
u max UNC
UNF
8UN
1.5000 1.6250 1.7500 1.8750 2.0000 2.2500 2.5000 2.7500 3.0000 3.2500 3.5000 3.7500 4.0000
6 - 5 - 4-1/2 4-1/2 4 4 4 4 4 4 4
12 - - - - - - - - - - - -
8 8 8 8 8 8 8 8 8 8 8 8 8
0.333 - 0.400 - 0.444 0.444 0.500 0.500 0.500 0.500 0.500 0.500 0.500
0.167 - - - - - - - - - - - -
0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250 0.250

A354 ANSI Carbon Steel HDG Fully Threaded Studs 0

A354 Grades

BD Grade BD bolts are higher in strength than grade BC, and equal in strength to ASTM F3125 grade A490 bolts. Unlike A490 however, the A354 standard is unrestricted in its configuration. Also, since A490 bolts are for structural use and do not exceed 1-1/2” in diameter, A354 grade BD should be considered for anchor bolts, threaded rods, other styles of headed bolts, and bolts larger than 1-1/2” diameter where similar mechanical properties are desired. A354 grade BD does not require a magnetic particle test like A490, except when called out as a supplemental requirement.
BC Lower in strength than BD. Should be considered in lieu of F3125 grade A325 bolts when configuration and size conflicts occur with A325 as described above for grade BD and A490 bolts./td>

A354 Mechanical Properties

Grade Size Tensile, ksi, min Yield, ksi, min Elong %, min RA %, min Hardness, HRC
BC 1/4 - 2-1/2 125 min 109 16 50 26 - 36
Over 2-1/2 115 min 99 16 45 22 - 33
BD All Sizes 150 - 173 130 14 40 33 - 38

A354 Chemical Properties

Element All sizes of Grade BC, Grade BD through 2-1/4” diameter. Grade BD over 2-1/4”
Carbon, % 0.30 to 0.53 0.35 to 0.53
Manganese, % min 0.60 0.60
Phosphorus, % max 0.035 0.035
Sulfur, % max 0.040 0.040
Boron, % max 0.003 0.003
Nickel, % min   0.40
Chromium, % min   0.40
Molybdenum, % min   0.15
Other Alloying Elements * *
*steel is considered to be alloy when the maximum range given for manganese exceeds 1.65 % or a definite minimum quantity for any of the following elements is specified or required within the limits of the recognized field of constructional alloy steels: chromium, molybdenum, nickel, or any other alloying element added to obtain a desired alloying effect.

Additional Requirements, Grade BD, Diameters above 2-1/4”

Charpy Impact 20ft-lbs minimum @ -4F
Cross Sectional Hardness Equidistant hardness readings shall be taken across the diameter of the fastener through the threaded section. Reading shall be no further apart than ¼”. No reading shall be outside the acceptable range given above, and no reading shall be greater than +/- 3 HRC points from the average mid-radius hardness value.

A354 Recommended Hardware

Grade Finish Nut Washer
BC Plain A563C Heavy Hex F436
Galvanized A563DH Heavy Hex F436
BD All Finished A563DH Heavy Hex F436
* Nuts of other grades and styles having specified proof load stresses greater than the specified grade and style of nut are acceptable.

Specification

 

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod. They are designed to be used in tension. Threaded rod in bar stock form is often called all-thread.

 

 

All thread rod, commonly referred to as fully threaded rod, redi-rod, continuously threaded rod, TFL rod, and abbreviated ATR is used for general purpose fastening for anything from an anchor bolt to a through bolt. A variety of grades and materials are available.

 

 

 

Materials and Chemical compstition

1008

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu Al
0.06 0.06 0.33 0.013 0.003 0.01 0 0.01 0.028

 

 

1035

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu
0.34 0.13 0.73 0.012 0.002 0.02 0.01 0.02

 

 

10B21

CHEMICAL COMPOSI %
C Si Mn P S Cr B
0.2 0.04 0.81 0.017 0.007 0.017 0.0021

 

 

1045

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu
0.45 0.23 0.58 0.014 0.006 0.057 0.008 0.016

 

40CR

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu
0.4 0.21 0.54 0.015 0.008 0.95 0.02 0.02

 

35CRMO

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu Mo
0.35 0.22 0.59 0.01 0.003 0.93 0.01 0.01 0.21

 

 

42CRMO

CHEMICAL COMPOSI %
C Si Mn P S Cr Ni Cu Mo
0.42 0.27 0.92 0.013 0.004 1.01 0.03 0.04 0.2

 

 

 

 

Finish

 

PLAIN ZP YZP BLACK HDG DACROMET GEOMET CHROME NICKEL AND SO ON

 

 

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

 

QBH SMALL PACKING

Packing in small boxes according to customer’s requirements

Packing in plastic bag according to customer’s requirements

 

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

 

 

The advantages of QBH

  • QBH brand sales to the main quality assurance.
  • Years of export trade management, excellent service, word-of-mouth guarantee.
  • By working with TUV,escort for quality.
  • Customization of non-standard parts can be made according to customer's requirements and drawings.
  • For quality customers,we can provide a certain credit period.